Neoden - ASI Technologies

NEODEN | PM3040 Stencil printer

zivit.drori — Mon, 04 Jun 2018 08:39:13 +0000

The same platform as printer can be selectable, easy to locate both single and double sides of PCB board, high flexibility ensure high printing precision;
The steel stencil can be rotated 30 degrees at most, and the precision can be kept all the way when repeat works, can be comparable with automatic machine;
Using the way of steel stencil movement to adjust the best position, combining with the fine adjustment of X-axis Y-axis to correct, convenient and efficient;
The frame made of thickened sheet metal, finest material, good quality with outstanding durability, the brackets using the bolt bar to adjust the height, convenient for controlling the thickness of PCB

P/N 62381

צרו קשר להצעת מחיר, ייעוץ ופרטים נוספים.

The post NEODEN | PM3040 Stencil printer appeared first on ASI Technologies.

Neoden | T-8 Reflow Oven

zivit.drori — Mon, 04 Jun 2018 08:37:29 +0000

T-8 reflow oven works with hot wind to solder PCB, support most normal components, LED and different kinds of IC.
The Crawler-type structure matches with eight heating zones and can make inside temperatures more accurate and well-proportioned Working temperature is reached in just 15-20min.
An AC motor is used to drive the conveyor belt. Speed adjustment are controlled by an automatic electronic analog switch, with sensitivity no more than 1 degree, control accuracy ±10mm/min.

The post Neoden | T-8 Reflow Oven appeared first on ASI Technologies.

Neoden | T-5S Reflow Oven

zivit.drori — Mon, 04 Jun 2018 08:36:15 +0000

T-5S reflow oven works with hot wind to solder PCB, support most normal components (if soldering IC, we recommend to use T5/T8).
The Crawler-type structure matches with five heating zones (3 up/2 down) and can make inside temperatures more accurate and well-proportioned. Working temperature is reached in just 15-20min.
An AC motor is used to drive the conveyor belt. Speed adjustment is controlled by an automatic electronic analog switch, with a sensitivity level of no more than 1 degree, control accuracy ±10mm/min.

The post Neoden | T-5S Reflow Oven appeared first on ASI Technologies.

Neoden | T5 Reflow Oven

zivit.drori — Mon, 04 Jun 2018 08:34:47 +0000

T-5 reflow oven works with hot wind to solder PCB, support most normal components, LED and different kinds of IC.
The Crawler-type structure matches with five heating zones (3 up/ 2 down) and makes inside temperature more accurate and well-proportioned. The working temperature is reached within 15 to 20 minutes.
An AC motor is used to drive the conveyor belt. Speed adjustments are controlled by an automatic electronic analog switch, with a sensitivity of no more than 1 degree, control accuracy ±10mm/min.

P/N 62382

The post Neoden | T5 Reflow Oven appeared first on ASI Technologies.

NEODEN | TM220A Desktop Pick and Place Machine

zivit.drori — Mon, 04 Jun 2018 08:31:40 +0000

TM220A is the first generation of NeoDen desktop pick and place machine. It features dual head, 16 feeder slots, laser sighted and adjustable positioning system, which is suitable for electronics hobbyists, lab researchers, engineers and small to medium manufacturing enterprises. Either of them is famous for its easy operation, stable performance, and competitive price. It is a best choice for those who want to start SMT business with a limited budget considering its capability, reliability and performance.

Features

Laser positioner, easy for online programming
Vacuum detection, automatically dispose and make up if picking fail or pickmisaligned
Dual pick and place head design helps increase output, 360-degree orientation
Noise reduction, Dual built-in mute type pumps (cost and room saving, no need to prepare additional pump)
Standard 8G SD card, mass storage of CSV working file
LCD, Touch screen interface input/output, easy operation (Chinese/English)
Integrated Automatic Feeders (cost saving, no need to buy extra mobile feeders), Automatic Nylon Spool Wheel (Very convenient, tape Nylon skin automatically peel away)
Works with four different types of high-precision nozzles
Humanization design, customized feeders
Can mount 0402, 0603, 0805, 1206, 1812, 2010, 2512, SOT-23, LED (3528, 5050 etc.), SOT89, SOP-8, SOP-14, SOP-16, SOT-223, SOT-252 and IC components (IC size under 16*16mm, PIN foot less than 100, fine-pitch above 0.5mm, the height of component less than 3mm) with required precision.
No vision system, the self-developed Laser positioning principle is quite effective for this type of machine.
Build-in software operating system, support Online programming: could easily online programming if you don’t have PCB Circuit diagram, with the assistance from laser positioner. No need to attach to a separate computer.
Easy programming, only takes 5mins: use Protel tool to extract the PCB circuit coordinate file, and use the format transformation tool we provided to you to transform the file format, and then copy to the SD card, insert to the machine, then you could use the file directly.
Standardization of packaging ensures safe transport.
Small and lightweight: simple installation, convenient transportation.
Working power 100W: Environmental protection and energy saving.

The post NEODEN | TM220A Desktop Pick and Place Machine appeared first on ASI Technologies.

NeoDen4 | without auto rails

zivit.drori — Mon, 04 Jun 2018 08:24:03 +0000

NeoDen4 is a pick and place machine of components flexibility, PCB flexibility and production flexibility. It is equipped with dual CCD cameras, auto rails, auto electronic feeders and 4 placement heads, which could support to mount 0201, BGA, QFN.

NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen, but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.

Features:

Vision system

An up-looking camera and a down-looking camera identifies and calibrates the different components simultaneously, and tremendously improves the accuracy of placement from 0201 to BGA

Four precision heads

4 high-precision placement heads with ±180° rotation that adopts suspended, fully symmetric and high degree of coupling way, to ensure it can mount components with higher space, more gentle and more accurate

Auto Electronic Feeders

Adopts feeding error corrections technique to help smooth the picking and reduce the deviation

General conveyor is supported

With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving

Supports remote system upgrade

NeoDen will provide a life-long technical service and system upgrade

Industrial PC motherboard

32G solid state drives, read/write faster and more stable, with power-off protection function

The post NeoDen4 | without auto rails appeared first on ASI Technologies.

NeoDen4 | with rails

zivit.drori — Mon, 04 Jun 2018 08:22:29 +0000

https://www.youtube.com/watch?v=4P7DDSTXIQo

Features

Vision system
An up-looking camera and a down-looking camera identifies and calibrates the different components simultaneously, and tremendously improves the accuracy of placement from 0201 to BGA
Four precision heads

Auto Electronic Feeders

Adopts feeding error corrections technique to help smooth the picking and reduce the deviation

Auto Rails Achieve Continuous Placement

1.5m auto rails could be connected with universal conveyors to achieve continuous placement

General conveyor is supported

With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving

Supports remote system upgrade

NeoDen will provide a life-long technical service and system upgrade

Industrial PC motherboard

32G solid state drives, read/write faster and more stable, with power-off protection function

The post NeoDen4 | with rails appeared first on ASI Technologies.

Neoden 4 | Pick and Place

zivit.drori — Mon, 04 Jun 2018 07:23:19 +0000

NeoDen 4- the latest Pick and Place Machine equipped with vision system, automatic PCB transport, 4 placement heads and automatic electric feeders, Developed and released by NeoDen Tech for Europe. This machine provides the best SMT automatic placement solution to customers who wanyt to start automated SMT assembly.

P/N 62380

The post Neoden 4 | Pick and Place appeared first on ASI Technologies.