פלקסים – נוזל ומשחות פלקס | חומרי הלחמה - ASI Technologies

AIM | No Clean Flux Pen

zivit.drori — Wed, 30 May 2018 15:00:41 +0000

AIM’s NC Flux Pen contains a low- to medium-solids, no-clean liquid flux formulated to aid soldering with flux cored wire solder. NC Flux offers an excellent activity level for use on ENIG, imsn, imag, bare copper, solder coated and OSP pcbs, leaving negligible post-process residues that are non-conductive and do not require post-process cleaning. NC Flux is safe to be left on the circuit board and passes IPC-004A and -004B SIR testing without thermal exposure.

The post AIM | No Clean Flux Pen appeared first on ASI Technologies.

AIM | RMA 202-25 Medium Solids, Mildly Activated Liquid Flux

zivit.drori — Wed, 30 May 2018 14:57:37 +0000

RMA 202-25 is a medium solids, mildly activated liquid flux with a solvent rosin activation formulated to provide a post-process flux residue that is both insulating and non-hydroscopic and does not require cleaning. As a mildly activated rosin based flux, RMA 202-25 offers a wide process window, good cleaning properties, and excellent thermal transfer.

The post AIM | RMA 202-25 Medium Solids, Mildly Activated Liquid Flux appeared first on ASI Technologies.

AIM | NC280 Low-to-medium solids, no-clean Liquid Flux

zivit.drori — Wed, 30 May 2018 14:52:32 +0000

NC280 is a low-to-medium solids, no-clean liquid flux formulated to leave minimal post-process residues that are pin testable without cleaning. NC280 offers an excellent activity level with good performance on bare copper, solder coated and organic coated PWBs, leaving negligible post-process residues that are non-conductive and do not require post-process cleaning. NC280 is safe to be left on the circuit board and passes SIR in the raw state. NC280 is extremely safe for rework, palletized wave soldering and point-to-point selective soldering. NC280 has a unique chemistry and a wide process window, making it a drop-in for most no-clean and RMA wave soldering operations, including lead-free wave soldering.

The post AIM | NC280 Low-to-medium solids, no-clean Liquid Flux appeared first on ASI Technologies.

AIM | NC217 Gel Flux

zivit.drori — Wed, 30 May 2018 14:51:04 +0000

NC217 Gel Flux is designed for touch-up and repair work where the flux may spread away from the heat source. NC217 Gel Flux is electrically safe even without a thermal profile. This gel flux dries within one hour of use with or without heat and is tack-free after four hours.

The post AIM | NC217 Gel Flux appeared first on ASI Technologies.

AIM | NC paste flux

zivit.drori — Wed, 30 May 2018 14:49:29 +0000

NC Paste Flux is a no clean tacky/rework flux designed to wet virtually all solderable electronic surfaces, components, assemblies, and substrates. AIM NC Paste Flux may be used for general touch up or rework of printed circuit boards, and for attaching spheres to ball grid array (BGA) packages.

The post AIM | NC paste flux appeared first on ASI Technologies.

AIM | FX16 No Clean Flux

zivit.drori — Wed, 30 May 2018 14:48:24 +0000

FX16 No Clean Flux has been engineered to provide exceptional soldering performance while leaving minimal, electrically safe flux residues, even when unheated. FX16 is ideally formulated for point-to-point selective soldering and palletized wave soldering. FX16 provides fast wetting and PTH barrel fill and reduces common soldering defects such as bridging, flagging and solder balls. FX16 has a durable activation system that can withstand high process temperature required for thermally demanding applications and extended solder contact time.

The post AIM | FX16 No Clean Flux appeared first on ASI Technologies.