The post RX-8 מכונת Pick & Place מהירה | JUKI appeared first on ASI Technologies.

The post RS-1XL – מכונת השמה | JUKI appeared first on ASI Technologies.

The post RS-1R מכונת Pick & Place – חכמה, מהירה ומודולרית | JUKI appeared first on ASI Technologies.

ייחודה של LX-8 טמון ביכולת החלפת ראשי ההשמה על ידי המפעיל, דבר המאפשר התאמה מהירה ופשוטה של סוג הראש הנבחר בהתאם לצורכי היישום. תכונה זו מאפשרת ייעול הפרודוקטיביות, שיפור ביצועי הייצור והתאמה מלאה לדרישות המשתנות של קווי הייצור.

The post LX-8 מכונת השמת רכיבים גמישה ומהירה | JUKI appeared first on ASI Technologies.

השילוב המתאים ביותר ביחס עלות – תועלת להדפסה ידנית.
המדפסת מאפשרת יישור מדויק של הסטנסיל ללוחות המעגלים המודפסים. יכולת הדיוק הגבוהה מבטיחה דיוק הדפסה ויכולת עבודה עם לוחות PCB חד-צדדיים ודו-צדדיים.
המדפסת קומפקטית וקלה ומציעה פתרון מושלם המתאים למעבדות פיתוח ולמפעלי אלקטרוניקה בהיקף קטן.

תכונות עיקריות:

• מבנה המדפסת מאפשר מיקום קל של לוחות PCB חד צדדיים ודו צדדיים, המבטיח דיוק הדפסה גבוה.
• ניתן לסובב את הסטנסיל עד 30 מעלות (לכל היותר) והדיוק נשמר לאורך כל זווית העבודה, בדומה למכונות אוטומטיות.
• התאמות X, Y, Z עדינות ומדויקות.
• מתאים ללוחות חד צדדיים ודו צדדיים.
• שטח הדפסה של  300*400 מ"מ.
• גוף המדפסת עשוי ממתכת עבה, המבטיח דיוק, איכות, יציבות בתוצאות ועמידות טובה.
• נעילת הלוחות במדפסת מתבצעת ע"י ברגים מתכווננים להתאמת הגובה, מה שמקל על דפינת הלוחות בהתאם לעובי הלוח PCB.

The post מדפסת משחת לחם ידנית NEODEN | PM3040 appeared first on ASI Technologies.

The post Neoden | T-8 Reflow Oven appeared first on ASI Technologies.

The post Neoden | T-5S Reflow Oven appeared first on ASI Technologies.

P/N 62382

The post Neoden | T5 Reflow Oven appeared first on ASI Technologies.

Features

• Laser positioner, easy for online programming
• Vacuum detection, automatically dispose and make up if picking fail or pickmisaligned
• Dual pick and place head design helps increase output, 360-degree orientation
• Noise reduction, Dual built-in mute type pumps (cost and room saving, no need to prepare additional pump)
• Standard 8G SD card, mass storage of CSV working file
• LCD, Touch screen interface input/output, easy operation (Chinese/English)
• Integrated Automatic Feeders (cost saving, no need to buy extra mobile feeders), Automatic Nylon Spool Wheel (Very convenient, tape Nylon skin automatically peel away)
• Works with four different types of high-precision nozzles
• Humanization design, customized feeders
• Can mount 0402, 0603, 0805, 1206, 1812, 2010, 2512, SOT-23, LED (3528, 5050 etc.), SOT89, SOP-8, SOP-14, SOP-16, SOT-223, SOT-252 and IC components (IC size under 16*16mm, PIN foot less than 100, fine-pitch above 0.5mm, the height of component less than 3mm) with required precision.
• No vision system, the self-developed Laser positioning principle is quite effective for this type of machine.
• Build-in software operating system, support Online programming: could easily online programming if you don’t have PCB Circuit diagram, with the assistance from laser positioner. No need to attach to a separate computer.
• Easy programming, only takes 5mins: use Protel tool to extract the PCB circuit coordinate file, and use the format transformation tool we provided to you to transform the file format, and then copy to the SD card, insert to the machine, then you could use the file directly.
• Standardization of packaging ensures safe transport.
• Small and lightweight: simple installation, convenient transportation.
• Working power 100W: Environmental protection and energy saving.

The post NEODEN | TM220A Desktop Pick and Place Machine appeared first on ASI Technologies.

NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen, but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.

Features:

• Vision system

An up-looking camera and a down-looking camera identifies and calibrates the different components simultaneously, and tremendously improves the accuracy of placement from 0201 to BGA

• Four precision heads

4 high-precision placement heads with ±180° rotation that adopts suspended, fully symmetric and high degree of coupling way, to ensure it can mount components with higher space, more gentle and more accurate

• Auto Electronic Feeders

Adopts feeding error corrections technique to help smooth the picking and reduce the deviation

• General conveyor is supported

With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving

• Supports remote system upgrade

NeoDen will provide a life-long technical service and system upgrade

• Industrial PC motherboard

32G solid state drives, read/write faster and more stable, with power-off protection function

The post NeoDen4 | without auto rails appeared first on ASI Technologies.

NeoDen4 is the best choice to satisfy all demands of high precision, high capacity, stable performance and low cost. This is a huge breakthrough not only for NeoDen, but also for small and medium-sized enterprises, those who want to improve placement accuracy and speed up PCB assembly with a limited budget.

https://www.youtube.com/watch?v=4P7DDSTXIQo

Features

• Vision system
  An up-looking camera and a down-looking camera identifies and calibrates the different components simultaneously, and tremendously improves the accuracy of placement from 0201 to BGA
• Four precision heads

4 high-precision placement heads with ±180° rotation that adopts suspended, fully symmetric and high degree of coupling way, to ensure it can mount components with higher space, gentler and more accurate

• Auto Electronic Feeders

Adopts feeding error corrections technique to help smooth the picking and reduce the deviation

• Auto Rails Achieve Continuous Placement

1.5m auto rails could be connected with universal conveyors to achieve continuous placement

• General conveyor is supported

With a conveyor port, One-Stop SMT production line can be setup, which is more time-saving and labor-saving

• Supports remote system upgrade

NeoDen will provide a life-long technical service and system upgrade

• Industrial PC motherboard

32G solid state drives, read/write faster and more stable, with power-off protection function

The post NeoDen4 | with rails appeared first on ASI Technologies.

P/N 62380

The post Neoden 4 | Pick and Place appeared first on ASI Technologies.

Maximum Productivity

JUKI’s RX-7 achieves a mounting speed of up to 75,000 CPH (optimum) thanks to its intelligent design with two ultra-fast parallel rotational heads that can each hold up to 16 vacuum nozzles.

High Quality

The two built-in cameras – one per rotational head – create real-time images during the placement process: in the course of the feeder uptake as well as while the component is being placed. The RX-7 cameras regonise whether components are positioned and soldered correctly, thus preventing mounting errors and defective circuit boards in advance.

User Friendliness

Owing to the integrated touchscreen, JUKI’s RX-7 is equipped with an easy to operate user surface, which allows an intuitive machine operation. As a result even users without any extensive technical knowledge can easily created pick-and-place programs.

The post השמת רכיבים – JUKI | RX-7 Pick and Place appeared first on ASI Technologies.

High Productivity

JUKI’s RX-6 specialises in high-speed component placement of up to 52,000 CPH (optimum). Each machine comes with two placement heads, one at the front and one at the back. This increases versatility as well as productivity and ensures the effective placement of components.

High Quality

Equipped with a laser system as well as an optical system the RX-6 operates with 2 centring technologies which ensure an uninterrupted optical detection of components at high speed. The standard RX-6 feature of a placement monitor and other features such as EPV – Embedded Process Verification, CVS – Component Verification System or OPASS – Offset Placement After Solder Screen-printing – recognise possible sources of error, even electrical ones, quickly and reliably.

High Flexibility

JUKI’s RX-6 is the ideal machine for line solutions, processing components from 0402 (01005) up to 50 × 50 mm. The head with three nozzles supports an even larger section: from 0402 (01005) chips with plugs up to lengths of 100 × 100 mm or 50 × 180 mm. The maximum component height that can be processed is 33 mm. Printed circuit boards of sizes up to 905 × 590 mm can be processed as standard.

The post JUKI | RX-6 Pick and Place appeared first on ASI Technologies.

מכונת ההשמה RS-1R הינה מכונה מודולרית, בעלת מהירות גבוהה ביותר של 47000 רכיבים בשעה, רמות דיוק גבוהות ומגוון גודל רכיבים מגודל 0201 מ"מ (008004 אינטש) ועד לרכיבים גדולים מאד. המכונה מוגדרת ALL IN ONE עקב גמישותה, יעילותה ומגוון היכולות.

המכונה בעלת מיקום ל112 מזינים, אופציה לחיבור מעלית מהצד, מערכת לייזר למדידת גובה ומצלמה מדויקת בעלת יכולת מעוף בגובה משתנה בהתאם לגובה הרכיבים. טכנולוגיית זיהוי הלייזר (פטנט רשום של JUKI) גמישה, מדויקת ואמינה מאפשרת ביצוע תהליכי ה"סט אפ" במהירות ויעילות.

רכיבים מ- 03015 מ"מ ועד 50 מ"מ מרובע ( SOP, PLCC ,QFP ) ממורכזים בעזרת מערכת מריכוז הלייזר הנותנת מריכוז יציב ומדויק אשר אינו מושפע משינויים ברכיב כגון צבע או צורה. נתוני הרכיבים פשוטים, מה שהופך את הוספת רכיבים חדשים לספריה למהירה ביותר.

לקבלת נתונים נוספים או הצעת מחיר אנא צרו קשר ונשמח לעמוד לרשותכם.

The post השמת רכיבים JUKI | Pick and Place RS-1R appeared first on ASI Technologies.

High Productivity

The high-resolution camera enables high-precision inspection of components such as QFPs with 0.2 mm lead pitch.

High Quality

A non-contact laser sensor measures the height of the PCB to prevent exessive force on components and reduce the risk of damage. This height measurement function sensor can also measure the pick height more accurately and faster than other methods.

The post השמת רכיבים – JUKI | KE-3000 Pick and Place appeared first on ASI Technologies.

Long Board Production up to 1,500 mm

This model is capable of 1,200 mm long PWB production as standard. Long board production up to 1,500 mm is available. This is the best long board size on the market. Long board production includes several clamping steps. Placements on the placement area are optimized in order to enhance placement speed and productivity significantly.

High Flexibility

Alternate pick by offset nozzles achieves high-speed placement for large components up to 25 mm diameter. Offset nozzles enable pick, recognition and placement of 6 diffusion lenses or large components, up to 25 mm diameter, in one pass. Reduced head unit movement improves productivity significantly.

High Productivity

The placement rate of 32,000 CPH is achieved due to a lighter crossbar and a revised steering of the head, therefore attaining a tempo increase of 18 % as opposed to the latest model. An independent control of each individual Z- and Theta-Axis of the head allows superior flexibility, accuracy and redundancy while achieving high-precision placement angles.

P/N 62368

The post השמת רכיבים – JUKI | JX-350 Pick and Place appeared first on ASI Technologies.

High Productivity

JUKI’s FX-3 achieves a mounting performance of up to 90,000 CPH (optimum) thanks to four independent cross-rails, each with a six-nozzle placement head set on two mounting stations, providing the machine with 24 vacuum nozzles in total.

Compatible Feeders

The FX-3 supports mechanical and electronic feeders that can be used optionally with feeder trolleys if required. This provides companies with the flexibility to keep using their existing equipment for the long term.

User Friendliness

JUKI’s FX-3 includes a user-friendly operator interface with a 15-inch LCD touchscreen both at the front and the back of the machine for easy, intuitive use. This allows users to create pick-and-place programs even without extensive technical knowledge.

P/N 62352

The post השמת רכיבים – JUKI | FX-3 Pick and Place appeared first on ASI Technologies.