Each component is metered via a servo controlled rotor that seals a rubberized stator to produce a continuous flow of material.  Tight tolerance on the sealing mechanism assures pulse-free and drip-free operation, even with low viscosity fluids.  As each component is metered in separate chambers, no routine flushing or purging is necessary as the chemistry will not crystallize in the fluid body.

The A and B components are introduced via a disposable static mixer in the air cap to produce a fine conical shaped pattern.

The post PVA | VPX-2KS Meter Mix / Valves appeared first on ASI Technologies.

The atomized spray process resulting from the FCS300-ES will produce excellent edge definition and coating transfer efficiencies in excess of 99%. The FCS300-ES features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The post PVA | FCS300-ES Selective Conformal Coating / Valves appeared first on ASI Technologies.

The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%. The FCS300 features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The post PVA | FCS300 Selective Conformal Coating / Valves appeared first on ASI Technologies.

The FCM100 “propels” precise shots of fluid onto a substrate resulting in accurate patterns at a high robot speed as no in process z-axis adjustments are required. The FCM100 is compatible with all PVA automated platforms.

The post PVA | FCM100 Selective Conformal Coating / Valves appeared first on ASI Technologies.

The Delta 6 features a robust overhead three-axis motion platform suitable for inline or batch operations.

While maintaining the preferred features of previous workcells, the Delta 6 has been designed with a slimmer footprint, improved structural and gantry rigidity for robustness, and easier access.

The post PVA | DELTA 6 Fluid Dispensing & Automation appeared first on ASI Technologies.

Ideal for selective coating, potting, bead, and meter-mix dispensing applications, the Delta 8 is conceptualized for maximum flexibility and can also be configured for custom assembly applications.

Maintaining the preferred features of previous workcells, the Delta 8 features a robust overhead three-axis motion platform suitable for inline or batch operations. Improved structural and gantry rigidity have been added for robustness and easier access.

The post PVA | DELTA 8 Fluid Dispensing & Automation appeared first on ASI Technologies.

The new Protecto coating system was developed to satisfy your demands for highest quality, stability and productivity for automatic in-line coating tasks.

Particular emphasis is placed on maintainability, intuitive program configuration and ultra-flexible equipment that can be adapted to customer requirements.

The patented Stream-Coat® nozzles measuring up to 100 mm long and only 2.4 mm thick enable a protective coating between tightly packed, tall components. This means expensive and time-consuming manual re-coating is a thing of the past.

Furthermore, different application methods such as dispensing, spraying or jetting can be achieved "on the fly", without changing the applicator and without splatters. Even areas under components can be coated using the connectible manifold cut-out on the Stream Coat® nozzles. The manifold cut-out does this by pushing the coating material under the component. Up to four different, selective coating tasks can be performed effortlessly with up to four coating applicators in multiple applications.

Features:

• Multifunctional coating application: jetting, dispensing and spraying
• Greatest possible process reliability
• Up to 4 heatable nozzles
• Highest coating accuracy
• All-in-one lacquering
• Selective coating
• Long-lasting fault-free lacquering
• Minimal maintenance required
• Also available as a production line concept consisting of a Protecto dispenser and RDS lacquer dryer
• Quick, intuitive programming with dependable software tools
• Flexible lacquering options thanks to multifunctional lacquer applicator

The post Rehm | Protecto XP Selective Conformal Coating Systems appeared first on ASI Technologies.

The upper surface of a plant’s leaves is its outermost defence, not only protecting it against pests and water loss, but also helping shake off dirt or increase resistance. This is a particularly well-known characteristic of the lotus flower – water just drips right off it. This was the biological inspiration behind innovative, self-cleaning surface coatings with what is known as the “lotus effect”.

The protective lacquer coating on electronic units acts in a similar way. It is now absolutely essential to protect sensitive components from aggressive environmental influences such as moisture, corrosion, chemicals, dust or vibration. High-selectivity conformal coating is the key to ensuring electronics work reliably and is indispensable in modern manufacturing.

Rehm has expanded its product range, introducing a compact, high-performance coating system to the market in ProtectoXC. Its low investment costs make it particularly appealing to electronics manufacturers who process low throughput. The device combines precise coating with a focus on what matters most: perfect protection for your electronics.

Features:

• Reliable coating process, even for low throughput
• Compact unit, easily integrated with batch or line production
• Modern software with touch operation and 3D trackball
• Barcode connectivity and optimum process documentation
• Low investment costs, top process performance
• Easy to maintain with its smart cleaning system

The post REHM | Protecto XC Protective Lacquer Coating appeared first on ASI Technologies.