Each component is metered via a servo controlled rotor that seals a rubberized stator to produce a continuous flow of material.  Tight tolerance on the sealing mechanism assures pulse-free and drip-free operation, even with low viscosity fluids.  As each component is metered in separate chambers, no routine flushing or purging is necessary as the chemistry will not crystallize in the fluid body.

The A and B components are introduced via a disposable static mixer in the air cap to produce a fine conical shaped pattern.

The post PVA | VPX-2KS Meter Mix / Valves appeared first on ASI Technologies.

The atomized spray process resulting from the FCS300-ES will produce excellent edge definition and coating transfer efficiencies in excess of 99%. The FCS300-ES features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The post PVA | FCS300-ES Selective Conformal Coating / Valves appeared first on ASI Technologies.

The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%. The FCS300 features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The post PVA | FCS300 Selective Conformal Coating / Valves appeared first on ASI Technologies.

The FCM100 “propels” precise shots of fluid onto a substrate resulting in accurate patterns at a high robot speed as no in process z-axis adjustments are required. The FCM100 is compatible with all PVA automated platforms.

The post PVA | FCM100 Selective Conformal Coating / Valves appeared first on ASI Technologies.

The Delta 6 features a robust overhead three-axis motion platform suitable for inline or batch operations.

While maintaining the preferred features of previous workcells, the Delta 6 has been designed with a slimmer footprint, improved structural and gantry rigidity for robustness, and easier access.

The post PVA | DELTA 6 Fluid Dispensing & Automation appeared first on ASI Technologies.

Ideal for selective coating, potting, bead, and meter-mix dispensing applications, the Delta 8 is conceptualized for maximum flexibility and can also be configured for custom assembly applications.

Maintaining the preferred features of previous workcells, the Delta 8 features a robust overhead three-axis motion platform suitable for inline or batch operations. Improved structural and gantry rigidity have been added for robustness and easier access.

The post PVA | DELTA 8 Fluid Dispensing & Automation appeared first on ASI Technologies.