ה-SB2900 בנוי על מסגרת אלומיניום ומותקן על רגליים מתכווננות. תא ההתזה הפנימי עשוי מנירוסטה בעובי 1.5 מ"מ ויוצר תא ריסוס ברוחב 850 מ"מ x 750 מ"מ עומק x 580 מ"מ גובה.
הלוחות החיצוניים מיוצרים מפלדה מצופה פלסטיק. לוח בקרה וסעפת אוויר ממוקמים בצד ימין של התא.
שולחן העבודה המסתובב הינו בעל אופציה המאפשרת על ידי לחיצת דוושה סיבוב ל4 רבעי מעגל על מנת להשאיר את הידיים חופשיות והינו בקוטר 350 מ"מ ועם שקע מרכזי להסרה וניקוי קל.
אביזרים וציוד נוסף אופציונליים:
• ארונות יבשים
• תא נפרד לבחינה ב UV וביצוע תיקונים
• מד לחות (מד RH/טמפרטורה)
• מייבשי לחות
•מכלי לחץ לשמירת חומר מוכן לציפוי

למידע נוסף, ייעוץ והזמנות צרו קשר.

The post תא לציפוי לכה GEN3 | SB 2900 appeared first on ASI Technologies.

Features:

• Proprietary, nozzle-less ultra-Thin Coating Application Technology (tCAT)
• Typical coatings applied include:
  • Phosphoric acid based dopants
  • Boric acid based dopants
  • Compatible with water based and solvent based dopants
• Non-contact coating application with excellent coating transfer efficiency – up to 99%
• Process width: 914mm (36 inches)
• Compatible with any in-line thermal diffusion furnace
• Long-life, high speed traversing mechanism with servo motor drive
• Constructed with materials compatible with acidic and caustic coating liquids
• Isolated and ventilated spray area
• PAC controller with touchscreen HMI
• PMP-200 Precision Metering Pump liquid delivery system, features:
  • Servo drive positive displacement liquid metering pump
  • Dual pump design for uninterrupted operation
  • Automatic pump refill from on-board PFA coating reservoir
  • Data logging
• Conveyor system:
  • Teflon coated Kevlar mesh belt
  • Up to 1.8 meters/minute (5.9 feet/minute) speed
  • Accommodates up to six (6) rows of 125mm (5 inch) wafers
  • Integrated water-based conveyor belt cleaning and drying system
  • Water-based conveyor belt cleaning system
• Optional wafer drying system

The post USI | PV 360 High-Volume, In-Line Spray Doping System appeared first on ASI Technologies.

Features:

• Proprietary, nozzle-less ultra-Thin Coating Application Technology (tCAT)
• Typical coatings applied include:
  • Anti-reflective coatings
  • Anti-smudge coatings
  • CdCl2 solutions
  • Carbon nano-particle, nano-tube and nano-wire solutions
  • Transparent conductive oxides
  • Adhesion promoters
  • Other proprietary coatings
• Excellent coating transfer efficiency: up to 99%
• Finished film thicknesses down to sub-micron level
• Large substrate process width – up to 1,219mm (48 inches)
• Long-life, high speed X-Y-Z gantry mechanism with servo drive
• Dual PMP-100 Precision Metering Pump liquid delivery system, features
  • Micro-stepping, positive displacement liquid metering pump
  • Dual pump design for uninterrupted operation
  • Automatic pump refill from coating reservoir
  • Data logging
• Isolated and ventilated spray area
• Constructed with materials compatible with acidic and caustic coating liquids
• Automated spray head wash down, clean and dry station
• State-of-the-art Ethernet based control system with Windows based Graphical User Interface
• Configurable as an in-line system or stand-alone
• Conveyor system
  • Stainless steel roller conveyor
  • Programmable speed up to 3.3 meters/minute (10.8 feet/minute)

The post USI | Prism 1200 Coating System appeared first on ASI Technologies.

Features:

• Proprietary, nozzle-less ultra-Thin Coating Application Technology (tCAT)
• Configurable, flexible platform to suit the requirements of precision coating applications in various industries including:
  • Semiconductor Packaging
  • Display
  • Fuel Cell
  • Medical
• Fully programmable X-Y-Z motion control
• Up to 780mm x 780mm usable spray area
• High speed X-Y-Z gantry, process speed up to 700mm/second
• Multiple liquid delivery system configurations including:
  • PMP-100 Precision Metering Pump liquid delivery system
    • Micro-stepping positive displacement liquid metering pump
    • Single or dual pump configurations available
    • Automatic pump refill from coating reservoir
    • Data logging
  • Automatic spray head clean and purge functionality
  • Designed to spray flammable coatings
  • Isolated and ventilated spray area
  • Windows 7 based graphical user interface
  • Optional substrate heater with vacuum
  • Optional powered HEPA filtration
  • Optional tandem spray heads for increased throughput
  • Substrate load and unload automation available
  • Optional spray head rotation and tilt functions
  • Dual substrate lift stations available
  • Many more options available

The post USI | Prism 800 X-Y-Z spray coating system appeared first on ASI Technologies.

The PRISM-500 is a high-performance X-Y-Z motion and positioning platform designed for the application of a wide variety of coatings. This flexible and highly configurable system is ideal for both production and R&D applications. All PRISM systems leverage USI’s proprietary, nozzle-less ultra-Thin Coating Application Technology (tCAT) which delivers a more precise coating application than conventional spray nozzles, film coaters, roll coaters, and jetting technology.

Features:

• Proprietary, nozzle-less ultra-Thin Coating Application Technology (tCAT)
• Additional spray and dispense technologies available
• Configurable, flexible platform to suit the requirements of precision coating applications in various markets, including:
  • Semiconductor Packaging
  • Display
  • Fuel Cell
  • Medical
  • Electronics Assembly
• Multiple liquid delivery system configurations including:
  • PMP-100 Precision Metering Pump liquid delivery system, features:
    • Micro stepping positive displacement liquid metering pump
    • Single or dual pump configurations available
    • Optional integrated fluid stirring to keep suspensions and inks mixed
    • Automatic pump refill from coating reservoir
    • Data logging
  • Pressurized reservoir with liquid solenoid valve for flow control
  • Pressurized reservoir with agitation and liquid recirculation
• Available in a batch configuration or with in-line conveyor
• Automatic spray head clean and purge
• 3- or 4-axis of motion
• Designed to spray flammable solvents
• Isolated and ventilated spray area
• Windows 7 based graphical user interface
• Optional substrate heater with vacuum
• Optional spray head rotation and tilt function
• Robot load lift/shuttle station available

The post USI | Prism 500 Coating appeared first on ASI Technologies.

Features:

• Proprietary, nozzle-less ultra-Thin Coating Application Technology (tCAT)
• Compact, bench-top platform designed to suit R&D and lab-scale coating requirements in a variety of markets, including:
  • Semiconductor Packaging
  • Display
  • Fuel Cell
  • Medical
  • Electronics Assembly
• Multiple liquid delivery system options including:
  • Precision Metering Pump liquid delivery system, features
    • 50 ml capacity disposable syringe (PMP-50)
    • 100 ml capacity glass syringe (PMP-100)
    • Micro stepping drive positive displacement liquid metering pump
    • Optional integrated fluid stirring to keep suspensions and inks mixed
    • Process data logging
    • Pressurized reservoir (6oz, 20oz or 2-gallon) with liquid solenoid valve for flow control
    • Internal mini system control for new Ultra-Coat sofware
    • Up to 99% transfer efficiency
    • 3 axis (X-Y-Z) of motion with sensor on the Z-axis to prevent crashes
    • Advanced Windows-based control interface
    • Laser pointer for programming
    • Designed to spray flammable solvents
    • Isolated and ventilated spray area
    • Optional tilt & rotate capability for sprayhead
    • Optional substrate heater with vacuum
    • Optional electronic head air flow control
    • Optional 590 ml reservoir

The post USI | Prism 400BT Benchtop Coating System appeared first on ASI Technologies.

Features:

• No masking of assembly parts required
• Complete dipping into the HFE solvent provide for a 100% surface moistened.
• Few minutes of drying time only
• Generates an approx. 50nm thin protective layer
• HFE liquid condenses and remains in the system
• The assembly leaves the system completely coated and dried.
• The assembly can be normally touched and is process-ready.

For different assemblies different baskets or insertions are usable. Also suitable for universal holders.

• The system BASIC V3 ist easy to operate.
• The system BASIC V3 is always and instantly ready to use and does not require a boot or shutdown.
• No special assembly programs required
• Easy immersion into the HFE solvent ensures a very easy process.
• Different types of assemblies can be packed closely and will be coated simultaneously.
• The used HFE liquid evaporates very quickly.
• The condensing HFE liquid will be absorbed and separated from water.

The water trap separates the water from the HFE liquid in the condensate and empties the water automatically in a 1l bottle. The HFE liquid flows back into the tank.

The collected water can be led in the sewage.

The water trap separates the water from the HFE liquid in the condensate and empties the water automatically in a 1l bottle. The HFE liquid flows back into the tank.

The collected water can be led in the sewage.

The electronic control including all electro-technical components is placed in a panel directly in the BASIC V3 system.

The lift is designed for a basket size with the internal dimensions L300mm x W250mm x H220mm. Other racks or magazines can also be used instead of the basket. The model BASIC V3 is connected easily with a 230V supply.

As an option, the BASIC V3 can be equipped with a filter system.

Another option includes an automated measuring and dosing station to keep the HFE solvent level constant

The post Puretecs | Basic V3 Coating System appeared first on ASI Technologies.

Great emphasis was placed on the process reliability and easy use. The assemblies’ coating is done by immersion in the fluoropolymer HFE solvent contained in the system’s tank. The assemblies to be coated are put in baskets placed on a lift. Both coating systems PRIMA V8 and OPTIMA V6 differ in the basket size.

By closing the lid and pressing the start button the immersion or dipping process and the subsequent drying process are automatically carried out within approximately 6 minutes.

Once the notification of completion appeared the basket can be simply exchanged. The baskets can be adapted easily to the assembly’s geometry or can be substituted with customized racks.

All coating systems are equipped with a cold trap for the HFE liquid recovery where the condensed HFE liquid can be collected in a built-in container or be returned in the tank. This provides for an extremely economic and environmentally friendly operation. A water trap absorbs the produced condensation in another collective container. Thus, the systems are compliant with legal HFE liquids regulations.

The color screen shows all information and is easy to adjust. The systems are equipped with filters for cleaning the HFE liquid. The liquid level is controlled. The lift can be set in any position automatically to allow exact partial immersion. The control interfaces provide for data output.

These coating system models offer a suitable solution for nearly all challenges.

The post Puretecs | OPtima V6 Coating System appeared first on ASI Technologies.