• חימום מעגלים בעת עבודה עליהם
• מונע עיוות של מעגלים ע"י איזון החימום בשני הצדדים
• קריאה דיגיטאלית של הטמפרטורה
• משטח קוורץ אינפרה-אדום גדול המתאים למגוון רחב של מעגלים
• מאפשר חימום עדין של מעגלים

למידע נוסף והזמנות צרו קשר.

The post עמדת חימום מקדים והסרת רכיבים קוורץ אינפרה-אדום ASI | 853A appeared first on ASI Technologies.

• The precise measurement of temperature at the solder joints of SMDs requires sensors with the smallest possible heat capacity. The digital Hot Gas Temperature Measuring Unit HTM 06 with is NiCrNithermocouple is particularly well situated for temperature measurements to be carried out at the solder joints or SMD bodies.
• This convenient unit can also be used to take measurements of temperatures in reflow ovens or similar applications.

The post Martin | Typ-K Temperature Meter appeared first on ASI Technologies.

Using flush mounts in combination with HOBEAM 04 or HOTBEAM 05 underheater devices may create a professional hand soldering work space with world highest ergonometric standards. PCB holders with only 20mm working height lower the working plane to just 20mm above table top.

A wide variety of different type PCB holders are available to fix PCB in 20mm height. Since the flush mounts are fabricated from steel the magnet feet from PCB holder can attach easily. All type holders are interchangeable and optimized to securely hold any PCB shape over the under heater. PCB Holders are spring loaded for repeatable positioning. This simple method of fixing PCBs has proven to be reliable over many years.

Securing PCBs in place during repair procedure sometimes becomes a tricky task: PCB edge-connectors  or  dense  population  of  components  can  make  clamping  and supporting PCBs difficult, especially if PCB are asymmetrical or non-rectangular.

The post Martin | PCB Support Tools 20.5mm Series appeared first on ASI Technologies.

Since physical height of HOTBEAM 04 device is 40mm, PCB-clamps and holders from 55,5mm family are perfectly suitable to hold electronic assemblies above the underheater. A wide selection of of clamps and holders is available.

Like all PCB support tools also these here have magnet feet. Therefore they can be moved very quickly to the place where the PCB can be fixed the best. Such a kind of flexibility is unique.

To use the magnet-feet PCB support tools on standard work benches the HOTBEAM 04 underheater should be placed onto a magnetic base plate. This simple method of holding PCBs has proven to be reliable over many years.

The secure fixation of PCBs – even in hand soldering processes – is of great importance to ensure repeatable results with highest quality.

The post Martin | PCB Support HOTBEAM 04 (high profile) appeared first on ASI Technologies.

All PCB clamps and PCB holders from 40.5 family can be used on EXPERT rework machines and HOTBEAM 05 underheater devices. These products provide free space between heating surface and PCB of 40.5 mm distance.

All PCB clamps and holders have magnet-feet to be most flexible in holding PCBs above underheater. This is important in particular when PCBs are non-symmetrical, have edge-population, or simply show an odd shape. Preferably clamps and holders are clicked on top of the system housing with their magnet feet, see photos next.

The unique Flex Support bars support large size and heavy PCB perfectly from underneath. The spring loaded pins from Flex Support bar will self-adjust to the down facing PCB topography and prevent the assembly from sacking down during rework process. Use of this tool reduces twisting and warping of PCB to very minimum. Any need for costly jigs to hold the PCBs might be re-discussed.

For repeatable processes and to archive good quality results a secure and stable fixation of electronic assemblies in rework is mandatory.

The post Martin | PCB Support for HOTBEAM 05 appeared first on ASI Technologies.

• New options for in-table-mounting are available for underheaters HOTBEAM 04 and HOTBEAM 05.  These allow underheaters to be completely integrated into tabletops so that the working height is the same as that of the surrounding work top.  Ergonomic as well as technical requirements for professional rework are therefore fully satisfied.
• Soldering small components and those with large contact areas, such as QFNs, TSSOPs and similar, on ‘warm’ printed circuit boards is kinder to components, PCBs and soldering iron tips.  IR Underheaters are often used to provide this background heat.  Unfortunately, the increased working height at which users have to work with soldering irons make such physical arrangements uncomfortable to use to the extend that the introduction of Underheaters is sometimes met with rejection.
• Anyone with responsibilities for production facilities will want these to be as efficient as possible.  Especially where repetitive actions occur, such as often with hand soldering, ergonomic considerations are very important.  Apart from the increased motivation a workstation arranged according to good ergonomic principles will also improve productivity and quality.  The cause of these effects is reduced operator fatigue because of relaxed posture and arm positions.
• An additional benefit is the fact that the table integrated Underheater no longer has to be removed from the workspace and stored away.  Just the customary ESD mat on top suffices to reinstate the ‘normal’ bench space!
• Low clamping PCB holders are available.  With 20mm clamping height, they complete the under heater application with the right accessories.

The post Martin | Flush Mount Set appeared first on ASI Technologies.

The graphical display of temperature reading allows a decent optimization of heating profiles. Profile parameter can be adjusted at the Monitor and the profile name can be entered with PC keyboard easily. This user interface allows a process documentation for audit purposes.

For EASYBEAMV2 the underheater is connected via USB with the PC and the software is started. EASYBEAM V2 loads the profiles into the PC and allows the user to either run profiles or modify parameter. At the end of optimization profiles might be saved back into the underheater device.

More over the back-up of heating profiles is possible. By loading profiles from the underheater and saving them to an external memory they are protected from unwanted changes – once defined processes can be reinstalled easily.

The important LOCK-function can be activated from EASYBEAM V2 only. This function disables the change of profile parameter from front panel of the device. It is a strong feature for all processes with high QC standards.

EASYBEAM can be used with Underheater firmware from HB04.01.05. 

The post Martin | EASYBEAM PC-Software for Underheaters appeared first on ASI Technologies.

• HOTPLATE 04 לחימום מעגלים בעלי צד אחד עם משטחי אדמה קשים ומעגלי לדים מורכבים.
• התצוגה הגדולה וארבעת הכפתורים בפאנל הקדמי מאפשרים בניית סט-אפ מהיר ושליטה בעד 25 תוכניות ופרופילים שניתן לשמור בתוך המכשיר.
• תוכנת ה EASYBEAM כלולה במכשיר ומאפשרת בניה ושמירה של פרופילי חימום מתוך שרת החברה ללא תלות במכשיר.

שליטה באיזורי החימום במכשיר מעניקה חימום ממוקד של המעגל וחיסכון באנרגיה.

The post חימום מקדים Martin | HOTPLATE 04 – 700W appeared first on ASI Technologies.

 HOTBEAM 04 

• אפשרויות חימום תחתון למטרות של החל מחימום המעגל לפני הלחמה ידנית ועד חימום מעגל לפני מכונות תיקון אוטומטיות.
• החברה מציעה מגוון של פתרונות חימום תחתון בגדלים שונים עם אינפרא אדום בעוצמה של W500 לחימום מעגלים בעלי צדדים כפולים (double sided).
• התצוגה הגדולה וארבעת הכפתורים בפאנל הקדמי מאפשרים בניית סט-אפ מהיר ושליטה בעד 25 תוכניות ופרופילים שניתן לשמור בתוך המכשיר.
• תוכנת ה EASYBEAM כלולה במכשיר ומאפשרת בניה ושמירה של פרופילי חימום מתוך שרת החברה ללא תלות במכשיר.

שליטה באיזורי החימום במכשיר מעניקה חימום ממוקד של המעגל וחיסכון באנרגיה.

The post חימום מקדים אינפרא-אדום Martin | HOTBEAM 04 – 500W appeared first on ASI Technologies.

 HOTBEAM 05

• אפשרויות חימום תחתון למטרות של החל מחימום המעגל לפני הלחמה ידנית ועד חימום מעגל לפני מכונות תיקון אוטומטיות.
• החברה מציעה מגוון של פתרונות חימום תחתון בגדלים שונים עם אינפרא אדום בעוצמה של 2000W לחימום מעגלים בעלי צדדים כפולים (double sided).
• התצוגה הגדולה וארבעת הכפתורים בפאנל הקדמי מאפשרים בניית סט-אפ מהיר ושליטה בעד 25 תוכניות ופרופילים שניתן לשמור בתוך המכשיר.
• תוכנת ה EASYBEAM כלולה במכשיר ומאפשרת בניה ושמירה של פרופילי חימום מתוך שרת החברה ללא תלות במכשיר.

שליטה באיזורי החימום במכשיר מעניקה חימום ממוקד של המעגל וחיסכון באנרגיה.

The post חימום מקדים אינפרא-אדום Martin | HOTBEAM 05 – 2.000W appeared first on ASI Technologies.

The post ASI | 883 Pre-Heater appeared first on ASI Technologies.

The post ASI | 863 Pre-Heater appeared first on ASI Technologies.

The post ASI | 853 Pre-Heater appeared first on ASI Technologies.