Each component is metered via a servo controlled rotor that seals a rubberized stator to produce a continuous flow of material.  Tight tolerance on the sealing mechanism assures pulse-free and drip-free operation, even with low viscosity fluids.  As each component is metered in separate chambers, no routine flushing or purging is necessary as the chemistry will not crystallize in the fluid body.

The A and B components are introduced via a disposable static mixer in the air cap to produce a fine conical shaped pattern.

The post PVA | VPX-2KS Meter Mix / Valves appeared first on ASI Technologies.

The atomized spray process resulting from the FCS300-ES will produce excellent edge definition and coating transfer efficiencies in excess of 99%. The FCS300-ES features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The post PVA | FCS300-ES Selective Conformal Coating / Valves appeared first on ASI Technologies.

The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%. The FCS300 features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The post PVA | FCS300 Selective Conformal Coating / Valves appeared first on ASI Technologies.

The FCM100 “propels” precise shots of fluid onto a substrate resulting in accurate patterns at a high robot speed as no in process z-axis adjustments are required. The FCM100 is compatible with all PVA automated platforms.

The post PVA | FCM100 Selective Conformal Coating / Valves appeared first on ASI Technologies.

The Delta 6 features a robust overhead three-axis motion platform suitable for inline or batch operations.

While maintaining the preferred features of previous workcells, the Delta 6 has been designed with a slimmer footprint, improved structural and gantry rigidity for robustness, and easier access.

The post PVA | DELTA 6 Fluid Dispensing & Automation appeared first on ASI Technologies.

Route Duplication
The user may set mark points on PCB and copy easily form side to another.

Routing Bit Sectioning
The user may set a designated distance, and have the routing bit shift-up or -down in order to make a new section of touting bit to cut boards for multiplying the life of the routing bit.

Friendly GUI
Windows system and Graphical User Interface (GUI) is adopted, which enables the user to learn and use the program easily. A 10 x zoom-in image is shown on screen for setting all points.

The post Aurotek | S168CE 2-way Sliding Exchanger appeared first on ASI Technologies.

50800

למידע נוסף והזמנות צרו קשר 

The post מיקרוסקופ דיגיטלי מקצועי Ash | Omni appeared first on ASI Technologies.