The JM10/JM20 automates the manual insertion process and is the advanced model for larger/heavier components and larger boards.

• Placement or Insertion of Surface Mount & Through-Hole Components
• Widest Component Range in the Electronics Industry
• Accommodates Multiple Types of Feeders

Features:

The TM 10/20 is a Hybrid SMT and Through Hole Placement machine; Compact Footprint. An advanced model for larger and heavier components and larger boards.

• 6 specialty nozzles per gantry allow for a wide variety of applications.
• Through Hole Placement with lead tip centering
• Lead Orientation Detection – The laser sensor is ideal for lead tip detections leading to an improved insertion process
• Radial Feeders – MRF-S/MRF-L, or snap-in MRF-LF
• Bowl Feeders – MBF (Fixed), MBF-C (Trolley) or MBF-L (for large components)
• High accuracy low noise ball screw drive
• High accuracy laser align component centering – Laser sensor integrated into placement head

The post JUKI | JM10/20 Hybrid SMT and Through Hole Placement machine appeared first on ASI Technologies.

Maximum Productivity

JUKI’s RX-7 achieves a mounting speed of up to 75,000 CPH (optimum) thanks to its intelligent design with two ultra-fast parallel rotational heads that can each hold up to 16 vacuum nozzles.

High Quality

The two built-in cameras – one per rotational head – create real-time images during the placement process: in the course of the feeder uptake as well as while the component is being placed. The RX-7 cameras regonise whether components are positioned and soldered correctly, thus preventing mounting errors and defective circuit boards in advance.

User Friendliness

Owing to the integrated touchscreen, JUKI’s RX-7 is equipped with an easy to operate user surface, which allows an intuitive machine operation. As a result even users without any extensive technical knowledge can easily created pick-and-place programs.

The post השמת רכיבים – JUKI | RX-7 Pick and Place appeared first on ASI Technologies.

High Productivity

JUKI’s RX-6 specialises in high-speed component placement of up to 52,000 CPH (optimum). Each machine comes with two placement heads, one at the front and one at the back. This increases versatility as well as productivity and ensures the effective placement of components.

High Quality

Equipped with a laser system as well as an optical system the RX-6 operates with 2 centring technologies which ensure an uninterrupted optical detection of components at high speed. The standard RX-6 feature of a placement monitor and other features such as EPV – Embedded Process Verification, CVS – Component Verification System or OPASS – Offset Placement After Solder Screen-printing – recognise possible sources of error, even electrical ones, quickly and reliably.

High Flexibility

JUKI’s RX-6 is the ideal machine for line solutions, processing components from 0402 (01005) up to 50 × 50 mm. The head with three nozzles supports an even larger section: from 0402 (01005) chips with plugs up to lengths of 100 × 100 mm or 50 × 180 mm. The maximum component height that can be processed is 33 mm. Printed circuit boards of sizes up to 905 × 590 mm can be processed as standard.

The post JUKI | RX-6 Pick and Place appeared first on ASI Technologies.

מכונת ההשמה RS-1R הינה מכונה מודולרית, בעלת מהירות גבוהה ביותר של 47000 רכיבים בשעה, רמות דיוק גבוהות ומגוון גודל רכיבים מגודל 0201 מ"מ (008004 אינטש) ועד לרכיבים גדולים מאד. המכונה מוגדרת ALL IN ONE עקב גמישותה, יעילותה ומגוון היכולות.

המכונה בעלת מיקום ל112 מזינים, אופציה לחיבור מעלית מהצד, מערכת לייזר למדידת גובה ומצלמה מדויקת בעלת יכולת מעוף בגובה משתנה בהתאם לגובה הרכיבים. טכנולוגיית זיהוי הלייזר (פטנט רשום של JUKI) גמישה, מדויקת ואמינה מאפשרת ביצוע תהליכי ה"סט אפ" במהירות ויעילות.

רכיבים מ- 03015 מ"מ ועד 50 מ"מ מרובע ( SOP, PLCC ,QFP ) ממורכזים בעזרת מערכת מריכוז הלייזר הנותנת מריכוז יציב ומדויק אשר אינו מושפע משינויים ברכיב כגון צבע או צורה. נתוני הרכיבים פשוטים, מה שהופך את הוספת רכיבים חדשים לספריה למהירה ביותר.

לקבלת נתונים נוספים או הצעת מחיר אנא צרו קשר ונשמח לעמוד לרשותכם.

The post השמת רכיבים JUKI | Pick and Place RS-1R appeared first on ASI Technologies.

High Productivity

The high-resolution camera enables high-precision inspection of components such as QFPs with 0.2 mm lead pitch.

High Quality

A non-contact laser sensor measures the height of the PCB to prevent exessive force on components and reduce the risk of damage. This height measurement function sensor can also measure the pick height more accurately and faster than other methods.

The post השמת רכיבים – JUKI | KE-3000 Pick and Place appeared first on ASI Technologies.

Long Board Production up to 1,500 mm

This model is capable of 1,200 mm long PWB production as standard. Long board production up to 1,500 mm is available. This is the best long board size on the market. Long board production includes several clamping steps. Placements on the placement area are optimized in order to enhance placement speed and productivity significantly.

High Flexibility

Alternate pick by offset nozzles achieves high-speed placement for large components up to 25 mm diameter. Offset nozzles enable pick, recognition and placement of 6 diffusion lenses or large components, up to 25 mm diameter, in one pass. Reduced head unit movement improves productivity significantly.

High Productivity

The placement rate of 32,000 CPH is achieved due to a lighter crossbar and a revised steering of the head, therefore attaining a tempo increase of 18 % as opposed to the latest model. An independent control of each individual Z- and Theta-Axis of the head allows superior flexibility, accuracy and redundancy while achieving high-precision placement angles.

P/N 62368

The post השמת רכיבים – JUKI | JX-350 Pick and Place appeared first on ASI Technologies.

High Productivity

JUKI’s FX-3 achieves a mounting performance of up to 90,000 CPH (optimum) thanks to four independent cross-rails, each with a six-nozzle placement head set on two mounting stations, providing the machine with 24 vacuum nozzles in total.

Compatible Feeders

The FX-3 supports mechanical and electronic feeders that can be used optionally with feeder trolleys if required. This provides companies with the flexibility to keep using their existing equipment for the long term.

User Friendliness

JUKI’s FX-3 includes a user-friendly operator interface with a 15-inch LCD touchscreen both at the front and the back of the machine for easy, intuitive use. This allows users to create pick-and-place programs even without extensive technical knowledge.

P/N 62352

The post השמת רכיבים – JUKI | FX-3 Pick and Place appeared first on ASI Technologies.